RadioLink Crossflight Flight Controller FC OSD Integrated 10CH PWM Output For RC FPV Drone Helicopter Airplane Car Boat

Crossflight FC Main Features:

• VibrationDamping by Software: Ensure the accuracy of sensor data at all times, achieve better Altitude Hold effect, and make the flight more stable.

• OSD Module Integrated:Support real-time graphically display OSD information such as the flight direction and position of the aircraft without the need for an external OSD module.

• 10 Channels PWM Output:Adaptable to 3-8 Axis Multirotor, Airplanes, helicopters, cars, boats and multiple industries.

• Mini Size as F4:Only 39.7*39.7*13mm and 16.5g, helps save space and reduce total weight to lengthen the flight time.

• Easier Installation and Setting:Offer comprehensive technical support including the usage guidance needed for all functions from basic use, PID parameter adjustment, log viewing, etc. of each model.

• Automation Software Testing System:The same Automation Software Testing System as PIXHAWK and Mini Pix helps realizes test automation from the sensor to connection ports and interface.

Note:

* The crossflight can set parameters by Radiolink Mission Planner, ArduPilot Mission Planner, and QGC Mission Planner.

* The crossflight only can upgrade the firmware by Radiolink Mission Planner, and only can upgrade the firmware from Radiolink.

* You could download the Radiolink mission planner and firmware via our official website:https://radiolink.com/crossflight

Parameters:

• Connector: JSTGH1.25 Connector

• PWM Output: 10 PWM Output

• Mavlink UART:2(without CTSRTS)

• USB Port:1(Type-C)

• GPSUART/I2C Port: 1

• RC In Signal Input:PPM/SBUS

• RSSI Output: Do not support

• OSD Module: OSD Module Integrated

• ESCProtocol:PWM

• DSHOTProtocol:Do not support

• ONESHOTProtocol:Do not support

• NeopixLed: Support

• Gripper Function: Support

• RTKSupport

• USBVoltage:5V0.3V

• ServoVoltage: Not applicable

• Operating Temperature:-40~80

• Adaptable Models:3-8 copter/Airplane/Helicopter/Car/Boat

• Dimention:39.7*39.7*13mm(1.56″*1.56″*0.51″)

• Weight:16.5g(0.58oz), 54g(1.9oz when all the connect wires included)

Power ModuleSpecifications:

• Input Voltage: 2-12S

• Input Current: 90A

• Output Voltage: 5.1V

• Output Current(BEC): 2.5A

• Input Current(connect to one ESC only): 20A

Hardware Specification:

• Processor:HC32F4A0PITB

• Gyro:ICM42670

• Compass:VCM5883

• Barometer:LPS22HB

• FRAM:Without FRAM, use the internal flash to store parameters, 2617 waypoints for multi-copters, and 2623 waypoints for airplanes

Thank you for you choose our product , we are trustworthy ,if you have any questions ,please message us freely , we would like to try our best to solve your issue .