MAD 5012 IPE V3.0 Brushless Motor

Product overview:

Single rotor load range: 1500-3000g
Continuous working thrust: suitable for long-term stable flight or industrial load tasks (such as spraying, mapping), taking into account efficiency and heat dissipation.
Application scenario: Higher load limit than MAD5010 IPE (1300-2500G), more suitable for jobs requiring higher redundancy or dynamic adjustment.
Single maximum thrust: 6.1kg
Instantaneous explosive force: short-term peak thrust (such as wind disturbance resistance, emergency climb), but to avoid continuous overload operation leading to demagnetization or overheating.

Comparative boost: 17% more than the MAD5010 EEE’s 5.2kg peak for more demanding power needs.

propeller compatibility: 18-22 inch carbon fiber propeller
Efficiency balance: Reduced blade range (the MAD5010 supports 16-24 inches), focused on medium and large blade Optimization, reducing vibration and energy loss.

Specification
Motor Model	MAD 5012 IPE V3.0	Number of pole pairs	14
Stator	Anticorrosive	Varnished wire Degree	180C
Motor Size	D:56 33.3 mm	Magnet Degree	150C
Degree of Protection	IP45	Cable Length	150 mm 16# Awg(Black) silicone
Centrifugal Heat Dissipation	YES	Rotor Balance	5 mg
Propeller Mounting Holes	D:12 M34, D:15 M34	Motor Balance	10 mg
Shaft Diameter	IN: 6 mm	Motor Mounting Holes	D:25 M34
Bearing	EZO 696ZZ*2	Disruptive test	500 V

Key Highlights:

Sustained thrust: 1.5-3.0kg

Max thrust: 6.1kg

Support voltage: 4S; 6S

Weight: 189~200g

Applicable Models:

Multi-rotor drones

Multi-axis drones

Recommended Accessories:

ESCs: AMPX 40A (5-14S) HV, AMPX 40A PRO (2-6S)

Propellers: FLUXER PRO 18×6.1 MATT, HAVOC 18×5.7 folding propeller, FLUXER PRO 19×5.7 MATT, FLUXER PRO 20×6.0 MATT, FLUXER PRO 21×6.3 MATT, FLUXER PRO 22×6.6 MATT, HAVOC 22×7.0 folding propeller

Selection and Installation Notes:

The propeller size and pitch must be matched to your aircraft configurationan incorrect propeller can reduce efficiency or cause motor/ESC overload.

Use an appropriately sized ESC and ensure the wiring harness can withstand continuous and peak motor current.

Ensure structural supports and couplings can withstand torque and dynamic loads.

Perform a balance check and routine inspection before each manned flight.

Local aviation and manned flight regulations must be followed.

Frequently Asked Questions:

Q: Which propeller should I use?

A: Propellers: FLUXER PRO 18×6.1 MATT, HAVOC 18×5.7 folding propeller, FLUXER PRO 19×5.7 MATT, FLUXER PRO 20×6.0 MATT, FLUXER PRO 21×6.3 MATT, FLUXER PRO 22×6.6 MATT, HAVOC 22×7.0 folding propeller

Q: Which ESC is compatible?

A: Please use the model provided by the manufacturer: ESC: AMPX 40A (5-14S) HV, AMPX 40A PRO (2-6S)

Q: What is the delivery time?

A: Delivery time is usually 7-14 days, but please confirm current stock and delivery time at checkout.

160KV

250KV

320KV

340KV