XLPower Specter 700 Nitro Left Side Frame : XL70V2NB02-1

XLPower Specter 700 Nitro Left Side Frame : XL70V2NB02-1

Optimised left side frame the rudder servo cutout has been removed, resulting in higher structural integrity and improved crash resistance.

For pilots who do not fly extremely hard 3D and are not concerned about rod strike, the WC-style upper tail control rod setup can be used. This reduces tail control linkage complexity and drag, but requires a 3500mAh or larger receiver pack to balance the CG.
Required parts: XL70V2A02 (servo spacers), MSH51145 (M2.516 screws), XL70V2T08-2 (tail control rod).

Alternatively, the Ultimate-style boom-mounted tail servo (XL70V2T12) can be used, but be aware of the risk of fuel contamination on the tail servo.

When using either the WC upper-rod setup or the Ultimate boom-mount setup, two left side frames can be installed together to strengthen the front section of the frame, making the front structure more rigid and durable.