HOBAO HYPER 10SC 2.0 ELECTRICTRUCK ARR W/CLEAR BODY

Features

• All Metal Parts CNC Machined.
• Chassis: Lightweight, Hard anodised CNC aluminium, 3mm thick.
• Center Top Brace
  – Wire pass through.
  – Quick Release.
• Drive:
  – Central: Single 4mm Hardened steel center driveshaft.
  – Optional Aluminum center driveshaft HOP1-0083.
  – Front wheel: CVA axles, 3.2mm Hardened steel.
  – Rear wheel: Dogbone axles, 3.4mm Hardened steel.
  – Optional rear wheel CVA axles HOP1-0082.
• Differentials:
  – Center differential is directly connected to rear differential.
  – Front, Rear and Center Differential, Metal Bevel gear, Anti-leakage Differential housing.
  – Pinion Gear: 10T (MOD 1)/ Ring Gear: 39T (MOD 1).
  – Center Spur Gear: 40T (MOD 1).
  – Motor Gear:13T (MOD 1).
  – Front differential filled with 20K silicone oil.
  – Center differential filled with 9K silicone oil.
  – Rear differential filled with 5K silicone oil.
• Shocks:
  – Filled with front 700 silicone oil and rear 600 silicone oil.
  – Aluminium 12mm Big Body, 3.5mm Shaft, Alum Adjustable Ring, Shock Cap Protector.
• Spring:
  – Front: 0.86kg/cm, L=50mm, Blue.
  – Rear: 064kg/cm, L=65mm, Blue.
  – Optional Front Spring HOP1-0073: 1kg/cm, L=50mm, Grey.
  – Optional Rear Spring HOP1-0074: 0.73kg/cm, L=65mm, Grey.
  – Shock Tower: 3mm CNC aluminium.
  – Optional carbon fiber shock tower, Front towerHOP1-0070& Rear towerHOP1-0071.
• Suspension:
  – Front PBS.
  – New design steering block with enlarged pivot ball and alum steering arms.
  – Optional alum steering block set HOP1-0077; Alum rear hubHOP1-0079.
  – New strengthened composite upper arms and lower arms.( Also Fitting for older versions of the Hyper 10SC).
  – Optional carbon fiber arm insertHOP1-0068andHOP1-0069.
  – Front & rear anti-roll bars.
  – New Alum front and rear arm holder.
  – Front and rear CNC alum arm holder with pill inserts H11367, adjustable toe angles and anti-squat angles.
• Steering:
  – New Steering Crank set with Strengthen CNC Aluminium steering rack and hard spring.
  – Ball bearing equipped with servo saver.
• Strengthen center body shell frame.
• Motor Mount:
  – CNC aluminium laydown motor mount.
  – Fitting for motors with size below 38mm.
  – Spur gear cover.
• Tyres:
  – 2.2/3.0 Short Course Tyres.
• Wheel Hex Hub:
  – Front 12mm wheel hex hubs , Plastic.
  – Rear 12mm wheel hex hubs, +1mm , Plastic.
  – Optional Front wheel hex hubs HOP1-0075; Rear wheel hex hubs HOP1-0076.
• Wheels:
  – 2.2/3.0, 12mm H40127.
  – Optional 5-Spoke Wheels. H11034.
• Ball Bearings:
  – Full set included.
• Caster:
  – Adjustable.
• Camber:
  – Adjustable.

Specifications

Length: 550mm
Width: 306mm
Height: 195mm
Wheelbase: 325mm
Front Track: 235mm
Rear Track: 240mm
Weight: 2870g

Required To Complete

• Radio 2 channel.
• ESC & Motor.
• High-torque steering servo.
• Glue for tyre.
• Paint for body.