Overview
Flashhobby M35CHW is a coreless digital servo designed for high-torque, high-voltage (HV) operation. It supports 6.0V to 8.4V input and is labeled IP67 waterproof, with a CNC aluminum case and metal gearing for RC models and robotics.
Key Features
- Coreless motor with digital control (PWM control, 1500usec center)
- HV operating range: 6.0V to 8.4V
- IP67 waterproof
- Metal gear train; dual ball bearings (2BB)
- CNC 6082 aluminum case; waterproof gaskets and bearing waterproof seal
- Marked 270 rotation (additional travel limits also provided in Specifications)
- 25T output spline marking on servo arm
For compatibility questions (power system, receiver/servo controller settings, or wiring), contact [email protected] or visit https://rcdrone.top/.
Specifications
| Model | M35CHW |
| Control system | PWM control (1500usec in the central point) |
| Signal type | Digital control |
| Operation voltage range | 6.0V ~ 8.4V |
| Operation temperature range | -20C ~ +60C |
| Life (no load) | > 1,000,000 times |
| Operation travel | 60 1 |
| Limit angle | 180 1 |
| Rotation marking | 270 |
| Direction / pulse travel | Re-clock wise / Pulse Travel 5002500 usec |
| Driver type | Mos Drive |
| Motor type | Coreless motor |
| Potentiometer type | Direct Drive |
| Gear material | Metal gear |
| Ball bearing | 2BB |
| Case material | CNC 6082 aluminum case / Aluminum case |
| Dimensions | 40 x 20 x 40.50mm |
| Weight | 75g (without servo horn) |
| Connector wire length | 300MM JR plug |
| Connector wire gauge | 22AWG |
| Wire info (Brown) | Negative |
| Wire info (Red) | Positive |
| Wire info (Yellow) | S Single |
| Dead band width | 1usec |
| Test voltage | At 6.00V / At 8.4V |
| Standing torque | 30kg-cm (6.00V) / 35kg-cm (8.4V) |
| Speed (no load) | 0.09sec/60 (6.00V) / 0.07sec/60 (8.4V) |
| Idle current | 300mA (6.00V) / 350mA (8.4V) |
| Running current | 4500mA (6.00V) / 6800mA (8.4V) |
| Additional dimension markings | 46mm (1.8inch); 40.5mm (1.59inch); 27.3mm (1.07inch); 40mm (1.6inch); 48.6mm (1.9inch); 24mm (0.94inch); 20mm (0.79inch); 9.9mm (0.38inch); 4.3mm; 3.2mm; 9.8mm; 9.90mm; 20.0mm; 5.0mm |
Applications
- RC cars and trucks (steering/throttle setups requiring high torque)
- RC aircraft control surfaces where a standard-size digital servo is used
- Robotics actuators requiring PWM-controlled servo positioning
Details
The Flashhobby M35CHW servo drawing provides key dimensions and mounting points to help plan fitment in your RC build.
The Flashhobby M35CHW coreless digital servo features an IP67 waterproof case and a metal output spline for reliable steering control in wet conditions.
Flashhobby M35CHW 35KG HV coreless digital servo features an IP67 waterproof case and includes a 25T aluminum servo horn and mounting screw.
The Flashhobby M35CHW coreless digital servo uses a compact 40mm-wide case with an IP67 waterproof rating and a 25T output spline.
Flashhobby M35CHW servo specs list PWM control (1500s center) with operating voltages of 6.0V and 8.4V, plus torque, speed, and current ratings.
The Flashhobby M35CHW digital servo features an IP67-rated case, 25T spline output, and a standard 3-wire receiver plug for easy installation.
Flashhobby M35CHW 35KG HV coreless digital servo comes with multiple servo horns, an aluminum arm, grommets, and mounting hardware for installation.
The Flashhobby M35CHW digital servo provides up to 270 of rotation and uses a 25T output spline for common horn compatibility.
The Flashhobby M35CHW coreless digital servo uses an aluminum case with metal gears, bearings, and IP67 waterproof seals for durable installs.
Reviews
There are no reviews yet.