4-way serial charge cable – JST-PH-2.0

This 1S charge cable allows you to charge multiple 1S batteries at the same time using a regularLiPo battery charger. The cable is wired in series,its not a parallel charge lead.Using the4in1leadwith four cells connected,your LiPo battery charger will detect it as a four cell LiPo;the individual batteries essentially each becoming a cell and you will see their cells voltages on the charger. The advantage of charging inseries, allows you to use yourexisting LiPo battery chargerto accurately balancecharge multiple cells at the same. You can alsostorage charge the 1S batteries and measure their internal resistance if your charger has those functions.
Please note, if you use the 4-way cable you must connect 4 cells to it, 6 for the 6-way you could connect fewer but it would require a jumper for the missing batteries.Only use this cable to charge batteries together of the same type, capacity and brand.The charge rate should be set according to the capacity of individual batteries (not the combined capacity of all batteries connected) for example if you connected 4x 300mAh LiPos, set your charger to 0.3A for 1CNOT 1.2A! Dont leaveunattended while charging or discharging.We recommend charging your batteries inside a protective charging bag well away from anything combustable.Features:

• Charge multiple 1SLiPos at the same time using a regular RC hobby balance charge
• Designed for use with JST-PH 2.0 AKA mCPX,ultra micro, powerwhoop connector
• Much faster method of charging than single cell 1S chargers
• Allows you to balance charge and storage charge cells individually

We urge all of our customers to always practice appropriate caution when charging lithium polymer packs.Never leave your battery charging unattended & do not leave batteries in direct sunlight. For more guidance, see the advice tab.