Equipped with the widely used STM32F405 chip and the advanced 42688-P gyroscope, this stack features 16M black box storage and an integrated LC filter for optimal signal clarity. It includes an upgraded Type-C USB interface and is compatible with direct connection to the DJI Air Unit. Paired with the TAKER H100_8S_BLS 100A 4IN1 ESC, featuring Dual MOS for high current and smooth flight performance, it supports 8S LiPo batteries. The straightforward installation design incorporates a shock absorber to stabilize the gyroscope, while dual independent BECs provide 12V@3A and 5V@3A outputs.
Package Includes:
1 x GEP-F405-8S Flight Controller
1 x TAKER H100_8S_BLS 100A 4IN1 ESC
1 x Electrolytic capacitor(50V 4700uF)
1 x DJI connection cable(SH1.0 6pin 100mm)
2 x FC adapter cable(SH1.0 8pin 30mm)
1 x Receiver silicone cable(SH1.0 4pin 150mm)
1 x Camera connection cable(SH1.0-SH1.25 3pin 135mm)
1 x VTX connection cable(SH1.0 4pin-6pin 100mm)
1 x XT90 battery plug
1 x Red and black power cable(10AWG 240mm)
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts(M3)
12 x Silicone anti-shake pads(M3)
Specifications:
GEP-F405-8S Flight Controller
MCUSTM32F405
IMUICM42688-P(SPI)
Air Unit ConnectionDirect plugging into DJI Air Unit
Black Box16M onboard
Barometer: support
Motor outputsM1-M8
USB InterfaceType-C
OSDBetaFlight OSD w/ AT7456E chip
BEC5V@3A,12V@3A dual BEC
Firmware TargetGEPRCF405_BT_HD
Size37x37mm
Mounting: 30.530.5mm4mm hole becomes 3mm after using a silicone shock-absorbing circle
Input Voltage3-8S LiPo
UART6 UARTs
Power FilterIntegrated LC filter
Weight8.3g
TAKER H100_8S_BLS 100A 4IN1 ESC
Input Voltage: 3-8S Lipo
Ammeter: Support
Calibration value200
Continue Current100A
Burst Current105A5 second
Support Protocol: Dshot 150/300/600
Size56.3*61.1mmhole30.530.5mm4mm hole becomes 3mm after using the silicone shock-absorbing ring.
Weight: 28.8g
Target: B_X_3
Info:
Reviews
There are no reviews yet.