Mornsun LI75-20B48R2S AC/DC 75W Din-Rail Power Supply

Mornsun LI75-20B48R2S AC/DC 75W Din-Rail Power Supply

Sure. The LI75-20B48R2S is a 75W AC/DC power supply from Mornsun. It has a single phase, metal case, and is designed for industrial use. The power supply has a wide input voltage range of 90-264VAC or 120-370VDC, and can output a single voltage of 48VDC at 1.6A. The power supply also features overvoltage, overcurrent, and short circuit protection.

check out :Mornsun LI120-20B24R2S AC/DC 120W DIN-Rail Power Supply

Note:

• Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25?, humidity<75%RH with nominal input voltage and rated output load
• The room temperature derating of 5?/1000m is needed for operating altitude greater than 2000m
• All index testing methods in this datasheet are based on our company’s corporate standards
• In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability
• The out case needs to be connected to the earth ( )of system when the terminal equipment in operating
• The output voltage can be adjusted by the ADJ, clockwise to increase
• Our products shall be classified according to ISO14001 and related environmental laws and regulations and shall be handled by qualified units
• The power supply is considered a component which will be installed intothe final equipment. All EMC tests should be confirmed with the final equipment