Raspberry Pi Zero 2 W Development Computer, PreSoldered 40Pin Header, QuadCore 1GHz CortexA53, WiFi 2.4GHz, BT 4.2 BLE

Overview

Raspberry Pi Zero 2 W with Header is a compact Development Computer in the Raspberry Pi Zero series. Built around the RP3A0 SysteminPackage integrating a Broadcom BCM2710A1 die and 512MB LPDDR2 SDRAM, it features a quadcore 64bit Arm CortexA53 CPU clocked at 1GHz. Wireless connectivity includes 2.4GHz 802.11 b/g/n WiFi and Bluetooth 4.2 with BLE support. This version includes a presoldered 40pin GPIO header for convenient access to GPIO and power pins. Compared with the original singlecore Raspberry Pi Zero, singlethread performance is up to 40% higher and multithread performance up to five times higher.

Key Features

• Mounted with headers and ready for use
• 2.4GHz 802.11 b/g/n wireless LAN
• Bluetooth 4.2 / Bluetooth Low Energy (BLE)
• Small form factor, suitable for various DIY projects
• Expansion 40pin HATcompatible I/O header (this version is presoldered; earlier unpopulated variants also supported)
• Footprintcompatible with earlier members of the Raspberry Pi Zero family
• Available in RP3A0 SysteminPackage
• Composite video and reset pins via solder test points
• Quadcore 64bit ARM CortexA53 processor clocked at 1GHz
• 512MB LPDDR2 SDRAM
• Builtin WiFi capability, ideal for IoT and robotics projects
• Modular compliance certification

Specifications

Form factor	65mm 30mm
Processor	Broadcom BCM2710A1, quadcore 64bit SoC (Arm CortexA53 @ 1GHz)
Memory	512MB LPDDR2 SDRAM
Wireless	2.4GHz 802.11 b/g/n WiFi; Bluetooth 4.2; BLE support
Video interfaces	mini HDMI; Composite video via solder test points
Multimedia	H.264, MPEG4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics
Storage	1x microSD card slot
Camera	1x CSI2 camera connector
USB	1x USB OnTheGo (OTG) port; 1x microUSB power port
GPIO	1x HATcompatible 40pin GPIO header (presoldered on this version)
Input power	5V DC 2.5A
Operating temperature	-20C to +70C
Production lifetime	Remain in production until at least January 2028

ECCN/HTS

HSCODE	8471504090
USHSCODE	8517180050
EUHSCODE	8471800000
COO	Japan
UPC

Whats Included

• Raspberry Pi Zero 2 W with Header 1

Applications

• Intelligent environmental monitoring
• Security monitoring systems
• IoT and robotics projects

Attention

• Any external power supply used with Raspberry Pi Zero 2 W shall comply with relevant regulations and standards applicable in the country of intended use.
• This product should be operated in a wellventilated environment, and if used inside a case, the case should not be covered.
• Whilst in use, this product should be placed on a stable, flat, nonconductive surface, and should not be contacted by conductive items.
• The connection of incompatible devices to Raspberry Pi Zero 2 W may affect compliance, result in damage to the unit, and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met. These include but are not limited to keyboards, monitors, and mice when used in conjunction with Raspberry Pi Zero 2 W.
• The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.

Safety Instructions

• Do not expose to water or moisture, or place on a conductive surface whilst in operation.
• Do not expose to heat from any source; Raspberry Pi Zero 2 W is designed for reliable operation at normal ambient temperatures.
• Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
• Whilst it is powered, avoid handling the printed circuit board, or only handle it by the edges to minimize the risk of electrostatic discharge damage.

Details