SpeedyBee F7 V3 Stack Accessory Bundle (No Flight Controller) – Cables, Hardware, 35V 1000uF, XT60

Overview

This accessory bundle is a complete set of components for the SpeedyBee F7 V3 Stack, including wiring and mounting hardware. Kindly note: the accessory bundle includes all components except for the flight controller unit itself.

Whats Included

• 35V 1000uF low ESR capacitor x 1
• M3 nylon nut x 5
• M3 silicone O ring x 5
• M3*8mm silicone grommets (for FC) x 5
• M3*8.1mm silicone grommets (for ESC) x 5
• SH 1.0mm 25mm-length 8pin cable (for FC-ESC connection) x 1
• M3*30mm inner-hexagon screws x 5
• DJI 6pin cable (80mm) x 1
• XT60 power cable (100mm) x 1
• 4pin SH1.0 to 3+2pin JST1.25 FPV cam cable (30mm) x 1
• 4pin SH1.0 to 3+2pin JST1.25 FPV cam cable (60mm) x 1
• 4pin SH1.0 to 4pin JST1.25 FPV cam cable (60mm) x 1
• 4pin SH1.0 radio receiver cable (100mm) x 1
• 4pin SH1.0 to 4pin SH1.0 analog VTX cable x 1
• 6pin SH1.0 GPS module cable without connector on another end (100mm) x 1
• 6pin SH1.0 GPS module cable connector of another end x 1

For compatibility questions before purchase, contact [email protected] or visit https://rcdrone.top/.

Specifications

Applications

• Replacement/maintenance cable and hardware set for the SpeedyBee F7 V3 Stack
• Wiring for common peripherals (DJI system cable, analog VTX, FPV camera, radio receiver, GPS)

Details

The SpeedyBee F7 V3 stack accessory bundle includes mounting hardware, a 35V 1000uF capacitor, an XT60 power lead, and multiple connection cables, excluding the flight controller.